BlackTop :: Chassis Paint

BlackTop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. BlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating but it will not offer the ultimate rust protection unless it is used in combination with RustSeal.

For the best stop rust & ultraviolet protection, first apply RustSeal to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish. Like RustSeal, BlackTop dries to a rock hard yet flexible coating that can be readily applied to chassis, coil springs and light weight panels. BlackTop also has high heat resistance and can be applied to almost all automotive applications except exhaust systems. Satisfaction guaranteed!

• Single component formula
• Permanent UV stability
• No chalking or fading
• Rock hard permanent topcoat
• Flexible coating which expands & contracts
• High temp resistance
• Non-porous coating
• Superior flow and leveling
• Apply by brush or sprayer

automotive & truck chassis • engine compartments • suspension components floor pans & trunks • wheels & rims • wrought iron railings • fire escapes

• 8 oz. of BlackTop will cover 25 sq. ft. with one coat.
• A Pint of BlackTop will cover 50 sq. ft. with one coat.
• A Quart of BlackTop will cover 100 sq. ft. with one coat.
• A Gallon of BlackTop will cover 400 sq. ft. with one coat.
• A 5 Gallon Pail of BlackTop will cover 2000 sq. ft. with one coat.

Note: Only one coat coverage required.

• Click HERE for BlackTop Application Information